A charge controller is an essential part of any solar system. It is the device that converts DC electricity from your solar panels into usable AC electricity that you can use in your home. An MPPT inverter is much more efficient than other types of controllers, allowing you to save money by using fewer solar panels to achieve the same results. It is a type of inverter that converts solar energy into DC power. They are used to charge batteries or directly supply power to the load.
The efficiency of MPPT inverters is higher than that of PWM ones. This is because the maximum power point tracking algorithm uses the full input voltage and current to determine the maximum power available at any time. It gives an output voltage that corresponds to this maximum power point.
How Do MPPT Inverters Work?
It works on the principle of Maximum PowerPoint Tracking, which means it will track the optimum voltage and current points to generate the maximum amount of electricity from your solar panels.
MPPT inverters act as a bridge between the solar panel and battery bank and automatically adjust themselves according to changing environmental conditions such as temperature, light intensity, etc. This helps maximize energy output from solar panels, increasing your battery bank’s charging efficiency.
What Is An MPP Solar Inverter?
An MPP solar inverter is a device that converts the DC power produced by solar panels into AC power, which can then be used to power your home. Inverters are required because the electricity produced by solar panels is not compatible with traditional power sources, such as utility grids and wall outlets.
The most common type of inverter for residential use is an MPPT (maximum power point tracking) converter, which optimizes energy efficiency by capturing every ounce of energy from the sun that hits your panels. In more technical terms, it uses a low-voltage DC from solar panels and transforms it into a high-voltage AC for homes and buildings today.
Advantages Of MPP Solar Inverters
- MPP solar inverters are more efficient. With these, your home gets power from the grid at night and uses it to charge batteries. Then during the day, they will store the energy in those batteries and give you power from them instead of taking it directly from the grid. This means less energy is wasted through your house’s transmission lines!
- MPP solar inverters are more reliable. With an MPP system, you won’t have to worry about blackouts or brownouts because these systems adjust themselves automatically depending on how much electricity is being produced by your photovoltaic panels and how much electricity you need in your home at any given moment!
- They are also smaller than traditional inverters, cost less upfront due to technological advancements, and require fewer parts, making maintenance easier.
Advantages Of MPPT Solar Inverter
Compared with other solar inverters, MPPT solar inverters have higher output power. The output power of this inverter is measured in watts. The output power of a typical MPPT solar inverter can reach 6000W while it is 3000W for a normal PWM Solar Inverter.
The efficiency of a solar inverter is the percentage of power converted from direct current (DC) to alternating current (AC). This can be broken down into two parts:
- The conversion efficiency of the solar cells themselves is usually around 15%. While the rest that’s lost due to inefficiencies in the wiring, fuses and other parts.
Reduced Cable Losses
They help reduce cable losses. Cable loss refers to the amount of power lost during transmission through cables. This is a common problem when using batteries and another reason why you must use MPPT solar inverters.
Power Boost At Low Irradiation Levels
The power boost function is a feature of mppt solar inverters. When the irradiation level is low, it increases the output power of the solar inverter by using more DC voltage and less grid current. This increases the efficiency of your system and reduces losses in your inverter’s wiring and cables.
Minimum Voltage And Maximum Power Point Are Tracked In Real-Time.
Traditional solar inverters track the maximum power point of the PV array but not it’s minimum voltage. If your battery bank is drained, a conventional solar inverter will continue to run at a loss even though it can not produce any more current than it already produces. MPPT solar inverters track both values so that when one falls below or above its operating range, it will automatically adjust its output accordingly without shutting down until it has recharged enough to operate again at normal levels. This prevents you from wasting energy on an inefficient system while avoiding damage to your equipment due to overloading.
Faster Charging With Fewer Charging Cycles
MPPT technology provides a faster and more efficient charge to your battery. Unlike conventional solar panels that can only convert about 17% of the sunlight hitting them into electricity, MPPT systems have an efficiency rate of about 40%. This means that for every hour you have your MPPT connected to your battery bank, you can charge up to 80% more power than if you were using conventional solar panels alone.
In addition to getting a quick charge on your batteries, MPPT also reduces the number of charging cycles required by the battery. By delivering a higher voltage than standard solar panels (which typically run at around 18 volts), MPPT systems increase efficiency by allowing batteries to charge faster while reducing stress on their internal components.
The latest technology in solar inverters has many benefits that make it the best choice for residential and commercial applications. The power boost feature allows MPPT solar inverters to track the maximum power point in real time, so your system will run at its highest efficiency. This leads to reduced costs and increased savings on your electricity bills with little or no maintenance required.
For further information, please do not hesitate to contact Deep Cycle Systems anytime!